{"title":"Tipper Hungry Boards","description":"\u003cp\u003eShop aluminium tipper hungry boards from All Tarps Australia. Choose a single replacement board, a replacement pair or a complete single-height kit with mounting brackets and hardware. Boards are available in multiple length tiers and can be cut to your nominated finished length. Local pickup is available from Heatherbrae, NSW, with freight quoted separately.\u003c\/p\u003e","products":[{"product_id":"complete-aluminium-tipper-hungry-board-kit","title":"Complete Aluminium Tipper Hungry Board Kit – Single Height","description":"\u003ch3\u003eTurn a suitable tipper into a bigger-volume truck for light, bulky loads.\u003c\/h3\u003e\n\u003cp\u003eMulch, green waste, woodchip, soil and general rubbish fill a tipper by volume long before they hit its weight limit. A single-height aluminium hungry board lifts each side so you can load higher, do fewer trips, and keep loose material from spilling over the sides on the road.\u003c\/p\u003e\n\u003cp\u003eThis complete kit has everything to fit one board per side: two aluminium planks, the end caps, the mounting brackets for both sides and the bolts to fix them. Boards come cut to your exact length free — or full length if you'd rather trim on site. Clean aluminium — light to lift on and off, and it won't rust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 × aluminium hungry board planks — cut free to your exact length, or supplied full length\u003c\/li\u003e\n\u003cli\u003e4 × matching end caps + end-cap rivets\u003c\/li\u003e\n\u003cli\u003eFront and rear mounting brackets for both sides\u003c\/li\u003e\n\u003cli\u003e6 × tap-tight (self-threading) mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommonly fitted to\u003c\/strong\u003e light tippers such as Isuzu, Hino and Fuso · landscaping, civil, tree work and waste operators. Every tipper body is built differently, so we confirm your fit before dispatch — the truck badge alone isn't enough.\u003c\/p\u003e\n\u003ch3\u003eHow ordering works — 4 steps\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePick the length option\u003c\/strong\u003e that covers your board length. Need 3,250mm? Pick “Up to 3.6m”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePay for your kit.\u003c\/strong\u003e Free pickup from Heatherbrae, or choose freight and we sort the cost with you before it ships.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmail us your photos.\u003c\/strong\u003e Send your order number and a few photos of your tipper (both sides, front and rear mounting areas, top rail) to contact@alltarps.store — with your exact board length in millimetres if you want us to cut, or just say you'll trim on site. You can also leave your length in the order notes at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWe check the fit, then it's yours.\u003c\/strong\u003e Fitment is confirmed from your photos before anything is cut or dispatched — so you can order even if you're not 100% sure yet. If it won't fit, you'll know before we make it, and you get a full refund.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFull length or cut to size — your choice\u003c\/h3\u003e\n\u003cp\u003eCutting to your exact millimetre is free — leave the length in the order notes or email it with your photos. Prefer to trim on site? Say so and we'll supply the boards at the full length of your chosen option (“Up to 3.6m” = 3.6m planks). Aluminium planks cut cleanly with common tools.\u003c\/p\u003e\n\u003cp\u003eOnce boards are custom cut they can't normally be changed or resold, so double-check your measurement. This does not affect your rights under the Australian Consumer Law.\u003c\/p\u003e\n\u003cp\u003eMade to order. Preparation time is confirmed once your fitment details have been reviewed.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my tipper?\u003c\/h3\u003e\n\u003cp\u003eTipper bodies vary between builders, even on the same truck model, so this system isn't guaranteed to fit every body. That's why we check fitment from your photos before anything is made or dispatched — no guesswork, no wrong parts turning up. If it won't fit, we'll tell you before we cut and refund you in full. See \u003ca href=\"\/pages\/measure-your-tipper-for-hungry-boards\"\u003ehow to measure your tipper\u003c\/a\u003e — ten minutes with a tape and your phone.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eInstallation requires drilling and mechanical fastening and is not included in the supply-only price. Local installation at our Heatherbrae workshop can be quoted separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must not interfere with the tipper body, tailgate, hinges, latches, tarp system, lights or other vehicle components.\u003c\/p\u003e\n\u003ch3\u003ePickup and freight\u003c\/h3\u003e\n\u003cp\u003eLocal pickup is available from Heatherbrae, NSW. Australia-wide delivery is available — because these are long-length items, freight is confirmed after your order and invoiced separately before dispatch. If the freight cost doesn't suit, you can cancel for a full refund before manufacture begins.\u003c\/p\u003e\n\u003ch3\u003eImportant load and vehicle notice\u003c\/h3\u003e\n\u003cp\u003eHungry boards increase the available body volume but do not increase the vehicle's legal GVM, axle capacity or permitted payload. The vehicle operator remains responsible for legal loading, load restraint, vehicle dimensions, roadworthiness and safe operation.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a hungry board?\u003c\/strong\u003e\u003cbr\u003eA side extension fitted above the existing sides of a tipper body to increase the usable load volume for lighter materials such as green waste, mulch and general rubbish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included with the complete kit?\u003c\/strong\u003e\u003cbr\u003eTwo aluminium planks, four end caps, end-cap rivets, front and rear mounting brackets for both sides, and six self-threading mounting bolts — everything to fit one board per side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the boards cut to size?\u003c\/strong\u003e\u003cbr\u003eYour choice — we cut them free to your exact length, or supply full-length planks for you to trim on site. Either way, fitment is confirmed from your photos before dispatch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat trucks do these suit?\u003c\/strong\u003e\u003cbr\u003eCommonly fitted to light tippers like Isuzu, Hino and Fuso, but bodies differ from builder to builder — so we confirm your exact fit from photos before dispatch rather than promising a badge fits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a modification certificate?\u003c\/strong\u003e\u003cbr\u003eBolt-on accessories are often fitted within a vehicle's specs, but tipper body work can fall under the national heavy-vehicle modification code (VSB6). Depending on your truck and how the boards are fitted, certification by an Approved Vehicle Examiner may apply. If you're unsure, check with your body builder or an AVE before fitting. We supply the parts — we don't certify vehicle modifications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stack two boards each side?\u003c\/strong\u003e\u003cbr\u003eNot through this kit. It's a single-height system, one plank per side. Double-height systems aren't available on this listing yet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo hungry boards increase my legal payload?\u003c\/strong\u003e\u003cbr\u003eNo. They add volume for light, bulky loads only — they don't change your GVM, axle capacity or permitted payload.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJust need boards, not brackets?\u003c\/strong\u003e\u003cbr\u003eGrab a single replacement board or a pair — see our other hungry board listings. Brackets on their own are available too.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a tarp over the top?\u003c\/strong\u003e\u003cbr\u003eWe make those too. Ask us about a hungry board and tarp package.\u003c\/p\u003e","brand":"All Tarps Australia","offers":[{"title":"Up to 2.4m","offer_id":55302113198385,"sku":"HB-KIT-2400","price":1099.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 3.0m","offer_id":55302113231153,"sku":"HB-KIT-3000","price":1209.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 3.6m","offer_id":55302113263921,"sku":"HB-KIT-3600","price":1319.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 4.0m","offer_id":55302113296689,"sku":"HB-KIT-4000","price":1429.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 5.0m","offer_id":55302113329457,"sku":"HB-KIT-5000","price":1649.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 6.0m","offer_id":55302113362225,"sku":"HB-KIT-6000","price":1869.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/8466\/8977\/files\/hungry-board-truck-hero.png?v=1784338641"},{"product_id":"replacement-aluminium-tipper-hungry-board-single","title":"Replacement Aluminium Tipper Hungry Board – Single","description":"\u003ch3\u003eReplace one damaged hungry board — full length, or cut to your size free.\u003c\/h3\u003e\n\u003cp\u003eClipped a board reversing, or bent one on a bad load? Get one aluminium plank with matching end caps and rivets — supplied at the full length of the option you choose, or cut to your exact millimetre free of charge if you tell us the size.\u003c\/p\u003e\n\u003cp\u003eThis is boards only — ideal if you're replacing a single existing board, or you already have your own mounting system and just need the plank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 × aluminium hungry board plank (full length, or cut to your nominated size — your choice)\u003c\/li\u003e\n\u003cli\u003e2 × matching end caps\u003c\/li\u003e\n\u003cli\u003eEnd-cap rivets\u003c\/li\u003e\n\u003cli\u003eCutting to your exact length — free, if you want it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e no mounting brackets, no truck-mounting bolts. Need those? Our Complete Aluminium Tipper Hungry Board Kit has the brackets and hardware for both sides, or grab the Bracket Kit on its own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck before you order:\u003c\/strong\u003e you are responsible for confirming that the plank profile and dimensions suit your existing brackets. Not sure? Email a photo of your current board and brackets to contact@alltarps.store and we'll check it for you.\u003c\/p\u003e\n\u003ch3\u003eHow ordering works — 3 steps\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePick the length option\u003c\/strong\u003e that covers your board. Need 3,250mm? Pick “Up to 3.6m”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWant us to cut it? Tell us.\u003c\/strong\u003e Leave your exact finished length in millimetres in the order notes at checkout, or email it with your order number to contact@alltarps.store — cutting is free. If we don't hear a length, we supply the plank at the full length of your chosen option and you can trim it on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePay and it's on its way.\u003c\/strong\u003e Free pickup from Heatherbrae, or choose freight and we sort the cost with you before it ships.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFull length or cut to size — your choice\u003c\/h3\u003e\n\u003cp\u003eBy default, you get the full length of the option you pick (“Up to 3.6m” = a 3.6m plank). Aluminium planks cut cleanly on site with common tools, so plenty of operators trim their own.\u003c\/p\u003e\n\u003cp\u003eRather have it arrive ready to fit? Give us your finished length in millimetres — order notes or email — and we cut it to the millimetre before dispatch, free. Once a board is custom cut it can't normally be changed or resold, so double-check your measurement. This does not affect your rights under the Australian Consumer Law.\u003c\/p\u003e\n\u003cp\u003eMade to order. Preparation time is confirmed after your order is reviewed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFitting a replacement board to existing brackets may still require drilling and mechanical fastening depending on your setup. Installation is not included in the supply-only price; local installation at our Heatherbrae workshop can be quoted separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must not interfere with the tipper body, tailgate, hinges, latches, tarp system, lights or other vehicle components.\u003c\/p\u003e\n\u003ch3\u003ePickup and freight\u003c\/h3\u003e\n\u003cp\u003eLocal pickup is available from Heatherbrae, NSW. Australia-wide delivery is available — because these are long-length items, freight is confirmed after your order and invoiced separately before dispatch. If the freight cost doesn't suit, you can cancel for a full refund before cutting or dispatch.\u003c\/p\u003e\n\u003ch3\u003eImportant load and vehicle notice\u003c\/h3\u003e\n\u003cp\u003eHungry boards increase the available body volume but do not increase the vehicle's legal GVM, axle capacity or permitted payload. The vehicle operator remains responsible for legal loading, load restraint, vehicle dimensions, roadworthiness and safe operation.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a hungry board?\u003c\/strong\u003e\u003cbr\u003eA side extension fitted above the existing sides of a tipper body to lift them higher, so you can carry more light, bulky material and keep it from spilling over.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the boards cut to size?\u003c\/strong\u003e\u003cbr\u003eYour choice. Leave your exact length in the order notes (or email it with your order number) and we cut it free before dispatch — or take the full-length plank and trim it on site yourself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I don't give you a length?\u003c\/strong\u003e\u003cbr\u003eYou'll receive the full length of the option you picked — e.g. “Up to 3.6m” ships as a 3.6m plank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this board fit my existing brackets?\u003c\/strong\u003e\u003cbr\u003eTipper setups vary, so you'll need to confirm the plank profile and dimensions suit your existing brackets. Email a photo of your current board and brackets to contact@alltarps.store if you'd like us to check before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI need brackets too.\u003c\/strong\u003e\u003cbr\u003eGo with our Complete Aluminium Tipper Hungry Board Kit — brackets and hardware for both sides included — or the Bracket Kit on its own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing both sides?\u003c\/strong\u003e\u003cbr\u003eOur pair listing works out cheaper than two singles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs installation included?\u003c\/strong\u003e\u003cbr\u003eNo. This is a supply-only price. Local installation at Heatherbrae can be quoted separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you freight Australia-wide?\u003c\/strong\u003e\u003cbr\u003eYes — freight is confirmed per order and invoiced separately before dispatch because of the board length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stack two boards on each side?\u003c\/strong\u003e\u003cbr\u003eThis current mounting system is offered as a single-height kit with one plank per side. Double-height systems are not currently available through this listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo hungry boards increase my legal payload?\u003c\/strong\u003e\u003cbr\u003eNo. They add volume for lighter materials only — they do not change the vehicle's GVM, axle capacity or permitted payload.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a tarp over the top?\u003c\/strong\u003e\u003cbr\u003eWe make those too. Ask us about a hungry board and tarp package.\u003c\/p\u003e","brand":"All Tarps Australia","offers":[{"title":"Up to 2.4m","offer_id":55302118277425,"sku":"HB-SINGLE-2400","price":329.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 3.0m","offer_id":55302118310193,"sku":"HB-SINGLE-3000","price":365.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 3.6m","offer_id":55302118342961,"sku":"HB-SINGLE-3600","price":419.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 4.0m","offer_id":55302118375729,"sku":"HB-SINGLE-4000","price":465.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 5.0m","offer_id":55302118408497,"sku":"HB-SINGLE-5000","price":585.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 6.0m","offer_id":55302118441265,"sku":"HB-SINGLE-6000","price":659.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/8466\/8977\/files\/hungry-board-single-hero.png?v=1784340196"},{"product_id":"replacement-aluminium-tipper-hungry-boards-pair","title":"Replacement Aluminium Tipper Hungry Boards – Pair","description":"\u003ch3\u003eTwo matching aluminium hungry boards — full length, or cut to your size free.\u003c\/h3\u003e\n\u003cp\u003eReplace both sides in one go, or fit fresh boards to a mounting system you already have. Two matching aluminium planks with end caps and rivets — supplied at the full length of the option you choose, or both cut to your exact millimetre free of charge if you tell us the size.\u003c\/p\u003e\n\u003cp\u003eThis is boards only — ideal if you're replacing both existing boards, or you already have suitable brackets on the body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 × matching aluminium hungry board planks (full length, or cut to your nominated size — your choice)\u003c\/li\u003e\n\u003cli\u003e4 × matching end caps\u003c\/li\u003e\n\u003cli\u003eEnd-cap rivets\u003c\/li\u003e\n\u003cli\u003eCutting to your exact length — free, if you want it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e no mounting brackets, no truck-mounting bolts. Need those? Our Complete Aluminium Tipper Hungry Board Kit has the brackets and hardware for both sides, or grab the Bracket Kit on its own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck before you order:\u003c\/strong\u003e you are responsible for confirming that the plank profile and dimensions suit your existing brackets. Not sure? Email a photo of your current boards and brackets to contact@alltarps.store and we'll check it for you.\u003c\/p\u003e\n\u003ch3\u003eHow ordering works — 3 steps\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePick the length option\u003c\/strong\u003e that covers your boards. Need 3,250mm? Pick “Up to 3.6m”.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWant us to cut them? Tell us.\u003c\/strong\u003e Leave your exact finished length in millimetres in the order notes at checkout, or email it with your order number to contact@alltarps.store — cutting is free. If we don't hear a length, we supply both planks at the full length of your chosen option and you can trim them on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePay and they're on their way.\u003c\/strong\u003e Free pickup from Heatherbrae, or choose freight and we sort the cost with you before dispatch.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFull length or cut to size — your choice\u003c\/h3\u003e\n\u003cp\u003eBy default, you get both planks at the full length of the option you pick (“Up to 3.6m” = two 3.6m planks). Aluminium planks cut cleanly on site with common tools, so plenty of operators trim their own.\u003c\/p\u003e\n\u003cp\u003eRather have them arrive ready to fit? Give us your finished length in millimetres — order notes or email — and we cut both to the millimetre before dispatch, free. Once boards are custom cut they can't normally be changed or resold, so double-check your measurement. This does not affect your rights under the Australian Consumer Law.\u003c\/p\u003e\n\u003cp\u003eMade to order. Preparation time is confirmed after your order is reviewed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFitting replacement boards to existing brackets may still require drilling and mechanical fastening depending on your setup. Installation is not included in the supply-only price; local installation at our Heatherbrae workshop can be quoted separately.\u003c\/p\u003e\n\u003cp\u003eInstallation must not interfere with the tipper body, tailgate, hinges, latches, tarp system, lights or other vehicle components.\u003c\/p\u003e\n\u003ch3\u003ePickup and freight\u003c\/h3\u003e\n\u003cp\u003eLocal pickup is available from Heatherbrae, NSW. Australia-wide delivery is available — because these are long-length items, freight is confirmed after your order and invoiced separately before dispatch. If the freight cost doesn't suit, you can cancel for a full refund before cutting or dispatch.\u003c\/p\u003e\n\u003ch3\u003eImportant load and vehicle notice\u003c\/h3\u003e\n\u003cp\u003eHungry boards increase the available body volume but do not increase the vehicle's legal GVM, axle capacity or permitted payload. The vehicle operator remains responsible for legal loading, load restraint, vehicle dimensions, roadworthiness and safe operation.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a hungry board?\u003c\/strong\u003e\u003cbr\u003eA side extension fitted above the existing sides of a tipper body to lift them higher, so you can carry more light, bulky material and keep it from spilling over.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the boards cut to size?\u003c\/strong\u003e\u003cbr\u003eYour choice. Leave your exact length in the order notes (or email it with your order number) and we cut both free before dispatch — or take the full-length planks and trim them on site yourself.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I don't give you a length?\u003c\/strong\u003e\u003cbr\u003eYou'll receive both planks at the full length of the option you picked — e.g. “Up to 3.6m” ships as two 3.6m planks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my existing brackets?\u003c\/strong\u003e\u003cbr\u003eTipper setups vary, so you'll need to confirm the plank profile and dimensions suit your existing brackets. Email a photo of your current boards and brackets to contact@alltarps.store if you'd like us to check before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI need brackets too.\u003c\/strong\u003e\u003cbr\u003eGo with our Complete Aluminium Tipper Hungry Board Kit — brackets and hardware for both sides included — or the Bracket Kit on its own.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly one side damaged?\u003c\/strong\u003e\u003cbr\u003eGrab a single replacement board instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs installation included?\u003c\/strong\u003e\u003cbr\u003eNo. This is a supply-only price. Local installation at Heatherbrae can be quoted separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you freight Australia-wide?\u003c\/strong\u003e\u003cbr\u003eYes — freight is confirmed per order and invoiced separately before dispatch because of the board length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I stack two boards on each side?\u003c\/strong\u003e\u003cbr\u003eThis current mounting system is offered as a single-height kit with one plank per side. Double-height systems are not currently available through this listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo hungry boards increase my legal payload?\u003c\/strong\u003e\u003cbr\u003eNo. They add volume for lighter materials only — they do not change the vehicle's GVM, axle capacity or permitted payload.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeed a tarp over the top?\u003c\/strong\u003e\u003cbr\u003eWe make those too. Ask us about a hungry board and tarp package.\u003c\/p\u003e","brand":"All Tarps Australia","offers":[{"title":"Up to 2.4m","offer_id":55302121390385,"sku":"HB-PAIR-2400","price":605.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 3.0m","offer_id":55302121423153,"sku":"HB-PAIR-3000","price":659.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 3.6m","offer_id":55302121455921,"sku":"HB-PAIR-3600","price":769.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 4.0m","offer_id":55302121488689,"sku":"HB-PAIR-4000","price":849.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 5.0m","offer_id":55302121521457,"sku":"HB-PAIR-5000","price":1079.0,"currency_code":"AUD","in_stock":true},{"title":"Up to 6.0m","offer_id":55302121554225,"sku":"HB-PAIR-6000","price":1245.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/8466\/8977\/files\/hungry-board-pair-hero.png?v=1784340196"},{"product_id":"hungry-board-mounting-bracket-kit","title":"Hungry Board Mounting Bracket Kit – Single Height","description":"\u003ch3\u003eThe part nobody sells: brackets to mount hungry boards on your tipper.\u003c\/h3\u003e\n\u003cp\u003ePlenty of places will sell you an aluminium plank. Almost nobody sells the mounting system to actually put it on the truck. This kit is the full single-height mounting setup: front and rear brackets for both sides, plus the self-threading bolts to fix them.\u003c\/p\u003e\n\u003cp\u003eIdeal if you've already got boards (or you're sourcing planks locally) and just need a proper way to mount them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat you get\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront and rear mounting brackets for both sides (one board per side, single height)\u003c\/li\u003e\n\u003cli\u003e6 × tap-tight (self-threading) mounting bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e boards and end caps. Need the whole lot? Our Complete Aluminium Tipper Hungry Board Kit includes boards cut to size, end caps, brackets and bolts.\u003c\/p\u003e\n\u003ch4\u003eWill they fit my tipper?\u003c\/h4\u003e\n\u003cp\u003eTipper bodies vary between builders, so these brackets aren't universal — we confirm fitment from your photos before dispatch. After ordering, email your order number and clear photos of the complete left side, complete right side, front mounting area, rear mounting area and upper tipper rail to contact@alltarps.store. If they won't suit your body, we'll tell you before anything ships and refund in full.\u003c\/p\u003e\n\u003cp\u003eSee \u003ca href=\"\/pages\/measure-your-tipper-for-hungry-boards\"\u003ehow to measure your tipper for hungry boards\u003c\/a\u003e — ten minutes with a tape and your phone.\u003c\/p\u003e\n\u003ch4\u003eFitting\u003c\/h4\u003e\n\u003cp\u003eFitting requires drilling and mechanical fastening — not included in the supply-only price. Local installation at our Heatherbrae workshop can be quoted separately. Fitting must not interfere with the tipper body, tailgate, hinges, latches, tarp system, lights or other vehicle components.\u003c\/p\u003e\n\u003ch4\u003ePickup \u0026amp; freight\u003c\/h4\u003e\n\u003cp\u003eFree local pickup from Heatherbrae, NSW, or delivery Australia-wide — freight confirmed with you after ordering and invoiced separately before dispatch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoad \u0026amp; vehicle notice.\u003c\/strong\u003e Hungry boards increase the available body volume but do not increase the vehicle's legal GVM, axle capacity or permitted payload. The vehicle operator remains responsible for legal loading, load restraint, vehicle dimensions, roadworthiness and safe operation. Depending on your vehicle and how boards are fitted, modification certification (VSB6\/AVE) may apply — check with your body builder if unsure.\u003c\/p\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIs this one side or both?\u003c\/strong\u003e Both — brackets and bolts to mount one board on each side of the tipper (single height).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount two boards high with these?\u003c\/strong\u003e No — this is a single-height mounting system. Double-height systems aren't currently available.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they suit my existing boards?\u003c\/strong\u003e They're made for standard aluminium plank-style hungry boards. Email a photo of your boards and body to contact@alltarps.store and we'll confirm before you order.\u003c\/p\u003e","brand":"All Tarps Australia","offers":[{"title":"Default Title","offer_id":55327417172273,"sku":"HB-BRACKET-KIT","price":349.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/8466\/8977\/files\/hungry-board-bracket-kit-photo.png?v=1784347922"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0879\/8466\/8977\/collections\/hungry-board-kit-contents.png?v=1784338641","url":"https:\/\/alltarps.store\/collections\/tipper-hungry-boards.oembed","provider":"All Tarps","version":"1.0","type":"link"}